Stock Code # 16" 8-933 18" 8-934 HAND LAWN MOWERS YARD-MAN CO. P. 0. BOX 360940 CLEVELAND, OHIO 44136 0411.385-A Printed in L “,ARD MAN G Y 1410 W.
AL UNNUMBERED PARTS INTER-CHANGEABLE WTH OPPOSITE SIDE SERVICE 2. Most lawn mower service shops are equipped with v Sharpen 4 hen ih u Lord-Man factory-built service equipment to give . sharpening is required when the mower will not cut e . satisfactorily without the reel blades wiping on the your YARD-MAN the same precision it had when it cutter bar. came from the factory.
HOW TO ORDER REPAIR PARTS FOR YOUR MODEL 1000-4 AND 1010-4 HAND LAWNMOWER 1110-4 BENT GRASS HAND MOWER WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION AS SHOWN IN THIS LIST: 1. THE PART NUMBER. 3 The MODEL NUMBER. 2. THE PART NAME. 4. The NAME of item. Your Mower is right hand or deft hand as you push. Do not use Key Numbers when ordering Repair Parts, always use Part Numbers. PARTS LIST Key Part Key Part No. Ne. Description Ho. No. Description 1 10 Grunion .
SETTING UP 1. Attach handle brace (1). (Fig. 1} 2. Attach handle brace spacer and handle s shown, tighten nuts {2} securely. 3. Attach cover plate and grass catcher clip with screws (3] 4. Convenient storage is provided for adjusting wrench. Attach to underside of handle spacer with wing nut {4) os shown. 5. if grass catcher is used, attach catcher hooks on inside of frame, under HEAD of roller bracket bolt, as shown in Fig. 1 ADJUSTMENTS TO CHANGE WHEELS FROM HIGH TO LOW T 1. Loosen axle nut approx.
