Use and Care Manual

20
4. Remove the spark plug and pour one ounce
of engine oil through the spark hole into
the cylinder. Cover spark plug hole with a
rag and crank the engine several times to
distribute the oil. Replace spark plug.
Preparing Snowblower
1. When storing the snow thrower in an
unventilated or metal storage shed, care
should be taken to rustproof the equipment,
using a light oil or silicone, coat the
equipment, especially any chains, springs,
bearings and cables.
2. Remove all dirt from exterior of engine and
equipment.
3. Follow lubrication recommendations in the
Maintenance section of this manual.
4. Store equipment in a clean dry area.