Use and Care Manual

24
Hotline: [phone]
Place the belt onto the engine pulley in groove.
Place the backside of the belt around the idler pulley and belt guides.
7. Slowly pull engine rope and observe belt movement to verify correct routing of belt.
8. Re-install the belt cover and tighten 4pcs bolts.
9. Attach the spark plug wire.
10. Follow Operating Instructions-start the engine and operate the clutch lever.
WARNING
！
The tines or wheels should not rotate with the engine running, the drive lever not engaged.
ENGINE MAINTENANCE
Refer to the engine manual included in your parts packet for information on engine maintenance. Your
engine manual provides detailed information and a maintenance schedule for performing the following
tasks:
1. Check oil level before each use or after every 8 hours of operation.
2. Change oil after rst 5-8 hours of operation. Change oil while engine is warm. Rell with new oil of
recommended grade.
3. Check spark plug yearly or every 100 hours of operation.
4. Service air cleaner.
5. Keep engine and parts clean.
6. Check engine and equipment often for loose nuts and bolts, keep these items tightened.
MAINTENANCE AND STORAGE
Engine Pulley
Belt Idler
Transmission Pulley
Fig. 14