Use and Care Manual

21
Hotline: [phone]
PERIODIC MAINTENANCE SCHEDULE TABLE
Service Records--Fill in dates as
you complete regular service
Before
Each
Use
After
Every
10
Hours
of Use
After
Every
25
Hours
of Use
After
Every
50
Hours
of Use
After
Every
100
Hours
of Use
Before
Each
Season
Before
Storage
See
Note
Below
Check air pressure in tires √
Check Engine Oil Level,
Fill to Proper Level
√ √
Clean Debris From Unit √ √ √
Lubricate All Pivot Points √ √ √
Check Fasteners for Tightness √ √ 1
Check Drive Belts
Replace if Necessary
√ √
Check Tines for Wear or Damage
Replace if Necessary
√ √
Check Fuel Line
Replace if Necessary
√ √
Lubricate Wheel Axles √ √ √
Check Spark Plug
Replace if Necessary
√ √
Change Engine Oil √ √ √ 2,3
Clean Air Filter
Replace if Necessary
√ √ 4
Replace Spark Plug √
Clean Combustion Deposits from
Cylinder, Piston, and Valves
√
Check Transmission Oil √ √
Important notes about maintenance schedule:
1. Re-check tightness of all fasteners after rst 2 hours of initial use
2. Change engine oil after rst 5—8 hours of initial use
3. Change oil every 25 hours if operating under heavy load or in high temperatures
4. Clean air lter every 10 hours if operating under dusty conditions.
Use only GENUINE replacement parts. Other parts may damage the unit or result in injury.
SERVICING THE TILLER
The following information will help you make the necessary checks and perform the procedures required to
follow the normal care recommendations made for your tiller unit. If you prefer, your local authorized dealer
can make these checks and perform the required procedures for you.
To prevent accidental starting:
Engine must be turned off and cool. The spark plug wire must be removed and secured from spark plug
before checking and adjusting engine or equipment.
MAINTENANCE
CAUTION
WARNING
！
WARNING
！
MAINTENANCE AND STORAGE