Replacement Part List

10
Hotline: [phone]
TECHNICAL SPECIFICATIONS
ASSEMBLY
TECHNICAL SPECIFICATIONS
Unit Weight 154lb(70kg)
Tilling Width 20 in (50cm)
Tilling Depth up to 14"
Tine Diameter 15 in (38 cm)
Gasoline Capacity 3.8 US qt. (3.6 L)
Engine Oil Capacity 20 US oz (600 ml)
Spark Plug 180 lb-in (20Nm)
Spark Plug Gap 0.03 in (0.76 mm)
Engine Type OHV 4-stroke, B&S CR950
Engine Displacement 208cc
Engine Speed (Full Throttle) 3600rpm
Engine Speed (Idle) 1800rpm
Bore Diam. x Stroke 2.76 x 2.13 in (70 x 54 mm)
Intake Valve Clearance 0.004 - 0.006 in (0.10 - 0.15 mm)
Exhaust Valve Clearance 0.006 - 0.008 in (0.15 -0.20 mm)
Tire Size 13x5.00-6 Directional Tractor Tread
Tire Pressure 25 psi min/30 psi max
Read and follow the assembly instructions. Do not discard, any parts or materials until the unit is
assembled.
References to the right or left side of the tiller are from the viewpoint of the operator’s position behind the
tiller.
WARNING
！
•
Do not operate tiller if it is damaged or not completely and correctly assembled.
•
Before doing any assembly or maintenance to the unit, remove the wire from the spark plug.
•
Always wear ANSI compliant safety glasses with side shields while assembling the tiller.
TO REMOVE TILLER FROM CARTON
1. Remove all parts and packaging components.
2. Use a utility knife to cut all four vertical edges and lay the side panels at around the tiller.
3. Remove any remaining packaging.