Instructions

42
Chipping tips
WARNING!
Always use the push stick to feed the material into the feeder opening. Never
reach into the feeder opening with your hands.
WARNING!
To avoid block the motor, never ll any damp, wet material into the feeder opening.
WARNING!
Do not disturb the neighbor surrounding you, use this device in accordance with
local rest periods.
1. This device is an idea tools for you to chipping the biodegradable material such as leaves, small
branches, use these chipped residues as biological fertilizer for your garden.
2. Feed the material in quantities, do not block the cutting head. It may cause unpredictable
accident or damage your device,
3. Do not put the soft waste such as kitchen waste into the feeder opening , because they are not
suitable for chipping , compost them is the best option.
4. To feed the smaller objects into the device, pls use the push sticker to safeguard your personal
safety.
5. Break the heavy material or branches into short one and smaller one prior to feed them into the
device, this will prevent the blades from blocking.
6. To prevent the blades from damaging by the hard objects, carefully checking the material to be
cut . pick them up such as stones ,nail or similar objects.
7. If you feel strong vibration of the device during the operation, it indicates the blade is blunt or
damaged, pls contact the service center.
8. To ensure the device can start again in safe manner for next time operation , ensure must switch
the device off when all material to be cut has passed through the chipper completely.
Empty the dustbin
As shown in Fig 10
1. Switch off the device.
2. Pull the interlock switch control lever downward.
3. Pull the dust bin out, empty it.
Fig.10