User manual

52
TROUBLESHOOTING
Trouble Shooting For Charging Station
LED Description
1 Blue light on Normal
2 Blue ash, Red off Charging station internal wire break, main Boundary is OK
3 Red ash, Blue off
Boundary cut off or poor connect, charging station internal wire
is OK if the mower is charging ,means normal
4 Red and Blue ash
Boundary and charging station internal wire both short circuit or
cut off
Main Customer Trouble Shooting
No. Message
type of
message
Symptom Action
1 NONE blank screen
1. Conrm the Isolated switch is
“ON”
2. When you rst use the mower the
battery may not be fully charged
please switch off and then carry
the mower to charging station,
once positioned in charging
station turn on switch again.
3. For normal working, press start
key on control panel, then start
the mower. Of mower does not
work, enter Error menu and
check fault code, once the fault
has been detected it can be
corrected and mower can then
cut.
4. In normal working if you press
any key on control panel, but
the screen is still blank carry the
mower to charge station. After 5
minutes, you can follow step 3.
5. High environmental temperature
can lead the machine
components to be protected,
when temperature is reduced, the
mower can working.
2 NONE
Your Mower
cannot enter the
charging station
1. Check if boundary wire under and
in front of the charger is straight
line.
2. Check that the charging station
is positioned according to clause
4.3.of manual.