User manual

INSTALLATION GUIDE

Once these connections are made, plug in power supply, there is a blue LED Light on

charging station, see below and if all is ok, it should light up with constant blue. If no LED

is lit, check the power connections rstly, if LED is on but not constant blue refer to the

trouble shooting guide below.

LED Description

1 Blue light on Normal

2 Blue ash, Red off Charging station internal wire break, main Boundary is OK

3 Red ash, Blue off

Boundary cut off or poor connect, charging station internal wire

is OK or if the mower is charging, it normal

4 Red and Blue ash

Boundary and charging station internal wire both short circuit or

cut off

LED

4.7. Turn On and Test the Installation

Once the LED light is constant blue, this means all is ok so now the Boundary wire pegs

can be knocked fully with hammer. Once this is done, double check the light is still blue

if yes then the boundary and charging station are all working as normal. Then place the

YARD FORCE Robotic Lawnmower in the working area, a few meters beside the charging

station.