User manual

UNDERSTANDING THE ROBOTIC MOWER

3.1. Parts List

1. Robotic Lawnmower 12. Display screen

2. Stop button 13. Transformer

3. Display and keypad 14. Extend cable

4. Charging contacts 15. Fixing peg

5. Charge station 16. Rain sensor

6. Blade (3per) 17. Measurement ruler

7. Blade holder 18. Boundary wire connector

8. Front wheel 19. Boundary wire

9. Rear wheel 20. Pen for touch screen

10. Carrying Handle 21. Cement resistance

11. Main isolation switch

3.2. YARD FORCE Robotic Mower Basic Operating Principles

The Robotic Lawnmower chooses its direction randomly, which means it will mow your

garden completely without leaving behind any uncut part within the area restricted by the

chosen boundary.

This boundary is chosen by you through installing supplied Boundary wire. Once the YARD

FORCE Robotic Lawnmower detect the boundary wire, it will stop, move backwards, and

turn away to cut within a different direction. It is important to ensure that the boundary is

complete. Any objects you wish to protect within the boundary, such as Garden Pond,

Tree, garden furniture or Flower bed can also be protected by the boundary wire. The

Boundary wire must form one complete circuit loop. If the Lawnmower during cutting

encounters an obstacle, such as a person, tree, pet or general garden obstacles it will

stop, move backwards and turn to mow in another direction.

If you have a corridor inside your lawn boundary, the corridor should be at least 2 meters

wide and a max length of 8 m.