SDS

Safety Data Sheets (SDSs)
Ref, No.: SUMEC-2023-025
Page 7 of 10 Pages
Precautions for safe handling
Keep away from ignition sources， heat and flame. Such batteries must be packed in inner
packages in such a manner as to effectively prevent short circuits and to prevent movement which
could lead to short circuits. Avoid mechanical or electrical abuse.
More than a momentary short circuit will generally reduce the battery service life. Avoid reversing
battery polarity within the battery assembly. In case of a battery unintentionally be crushed, rubber
gloves must be used to handle all battery components. Avoid contact with eyes, skin. Avoid
inhalation. No smoking at working site. Materials to Avoid: Strong oxidizing agents， Corrosives.
Conditions for safe storage, including any incompatibilities
Store in a cool， well-ventilated area. Keep away from ignition sources， heat and flame. Such
batteries must be packed in inner packages in such a manner as to effectively prevent short circuits
and to prevent movement which could lead to short-circuits. Materials to Avoid: Strong oxidizing
agents，Corrosives.
Engineering Controls:
Use ventilation equipment if available. Safety shower and eye bath.
Personal Protective Equipment:
Respiratory System: Not necessary under conditions of normal
use. Eyes: Not necessary under conditions of normal use.
Clothing: Wear appropriate protective
clothing. Hand: Safety gloves.
Other Protect:
No smoking，drinking and eating at working site. Wash thoroughly after handling.
PhysicalState
Form: square
Color: No information
Odour: If leaking, smells of medical ether
Odor Threshold: No information available
Change in condition:
pH, with indication of the concentration Not determined.
Melting point/freezing point Not determined.
Initial boiling point and Boiling range: Not determined.
Flash Point Not determined.
Flammability (solid, gas) Not determined.
SECTION 8:EXPOSURE CONTROLS AND PERSONAL PROTECTION
SECTION 9: Physical and chemical properties