Use and Care Manual

22 23
Hotline: [phone] Hotline: [phone]
Sensor setting
1. Press the button to enter the menu setting.
Timer Sensor PIN English
1
2
3
4
2. Press the button to enter the sensor setting.
Sensor Settings
1 2
UltraSonic
Rain
Raning Setting
ON
OFF
Settings
1
2 3
Delay Time In Charging
002 minute
UltraSonic Setting
30 cm (30-60)
UltraSonic Setting
ON
OFF
Settings
1
2 3
- UltraSonic sensor
This machine equipped 2 ultrasonic sensors which may detect the obstacle on the lawn. When the sensor is
actived, the robot will stop and then turn around when detect an obstacle.
Press
to switch off the sensor.
Press
to elect the detect distance you require.
- Rain sensor
NOTE: Mowing in the rain is not recommended.
This machine has a rain sensor which may stop the robot from mowing in the rain. When the rain sensor is
triggered, the robot will go back to the charging station first, where it will be fully charged. Once charged the
mower will remain in the charging station until the rain has stopped before starting to mow again.
Note: Be careful not to short circuit the sensors on the machine with any metal objects. This will cause the
mower to work abnormally.
Press
to switch off the sensor.
Press
to set the extra time.
PIN code
1. Press the
button to enter the menu setting.
Timer Sensor PIN English
1
2
3
4
2. Press the button to enter the PIN setting.
- This option sets the passcode of the mower to prevent theft or unauthorised change of the menu settings.
The existing (old) passcode is required to change to a new passcode. If you have forgotten the passcode,
contact your local dealer or after sales service.
The default passcode of the mower is “0000”.
Enter Old PIN Code
* * * *
1
2
Re-Enter New PIN Code
* * * *
* * * *
Enter New PIN Code
- After re- enter the new PIN, press button complete this setting.
Language
1. Press the button to enter the menu setting.
2. Select related number to set the language you require.
Current Language Setting
English
Svenska
Deutsh
5
1 2
3
WiFi settings
Press the button to enter the menu setting.
WiFi
Config
Status
Mode
1
2
3
There are 3 further options in “WiFi”.
Config
Select this option when you need to connect you mower to APP, see APP manual
Status
Show currently WiFi status
Mode
Client Mode-Default mode
Direct Mode-select this mode when you choose direct mode connection you on your phone.
Signal setting
- Set you require signal by pressing S1 or S2 button.
OPERATION OPERATION