User's Manual

KEYPAD INSTRUCTIONS
Hold down the Power button for 3
seconds until the Power light turns on.
Then release button.
Hold down the Power button for 3
seconds until the Power light flashes
3 times. Then release button.
Has detected other unit(s) of the
same group.
No detection of other unit of the same
group.
Press Power button 2 seconds to
resume the communication and the
power light is flashing for 2 seconds.
06 07
Power Up
Power Down
Light Solid -
Normal Intensity
Light Solid -
High Intensity
Force Sync
POWER
BATTERY
Light Flashing
Slowly
Light Flashing
Fast
Light Solid
Light Off &
Group Light
Solid On
15% Battery level
5% Battery level
Battery is being charged
Battery is fully charged
GROUP
Activate
Binding Mode
(See BINDING
section)
Deactivate
Binding Mode
Press the Group button while holding
down the Settings button for 3 seconds,
the Group light and the Battery light
begin to flash alternatively. Release
buttons for 5 or more seconds, the
Group light is solid on.
Power down the radio then power it up.
BLUETOOTH
Activate
Pairing Mode
(See PAIRING
section)
Light Flashing
Slowly
Light Flashing
Fast
Activate
PTT State
Deactivate
PTT State
Press the Bluetooth button while holding
down the Settings button for 2 seconds,
the Bluetooth light will keep flashing until
the pairing is done with the light off.
There is no extra step to exit Pairing
Mode.
No detection of the paired headset
Unit is in pairing state
Press the Bluetooth button once. And
the Settings light is on (Base Unit only).
Press the Bluetooth button again. And
the Settings light is off (Base Unit only).
Red
Amber
Green
Green
SUBGROUP
(Subgroup feature is only available to custom orders.
Please contact your vendor for customization.)
Green
SETTINGS
Light Solid
Light Off
Unit in PTT state by pressing Bluetooth
button once
Unit in open MIC state by pressing
Bluetooth button again
Green
Light Solid
Light Flashing
Talking slot(s) are available
PTT button of the paired headset is
being pressed
For Base Unit
For Expansion Unit