User's Manual

Yanzi Networks reserve the right to change this specification at any time without notice. Disclaimer: Yanzi Networks can not guarantee that this specification is 100% correct.
Yanzi Climate Product Brief Doc No: 890-07055 Ver: 02 Date: 2015-09-02
Highlights
● Simple to install - single tap encryption
setup
● Provides temperature and relative
humidity
● Easily mounted on walls or standing
on a shelf
For instructions and information about safety, warranty, and recycling, please visit
www.yanzinetworks.com
Getting started
Two steps to get started
1. Plug in batteries
2. Accept over Cirrus or in Yanzi App
You are now ready to interact with your
Yanzi Climate
Specifications
Measurement Range
● Humidity 0% to 100% RH
● Temperature -30°C to +60°C
Measurement Accuracy
● Humidity ±5% (20-80% RH)
● Temperature ±0.5°C (-10°C to +60°C)
±1°C (-30°C to -10°C)
Power
● 4 pcs of 1.5V AA Lithium Li-Fe or
4 pcs of 1.5V AA Alkaline batteries
● Battery lifetime expectancy up to 10 years*
Wireless Performance:
● IEEE 802.15.4 2.4GHz IPv6 Sensor
Network supporting Mesh Technology
● Wireless Output Power
3dBm - 8dBm (~2 - 6.3mW)
● Wireless Range 5-25m indoor,
50 - 100m Line of Sight (Indicative)
● Omnidirectional internal antenna,
0.5dBi peak gain
● ECC/AES encryption. High security with
unique encryption keys for each Yanzi
Climate - automatically installed at setup
Environmental Requirements
● Operating Requirements -30°C to +60°C,
0 - 100% RH(non-condensing)
Indoor and protected outdoor
● Storage Requirements 0°C to +50°C,
20 - 80% RH(non-condensing)
● IP42 protection
Designed for vertical mounting
when outdoors
External Buttons
● Status (press to show status on LED)
● Reset (press and hold for >20 s)
Dimensions
● 96 x 62 x 29 mm
* To ensure long battery life, Lithium batteries are required,
especially in conditions with temperatures below 0°C
Ordering Information
SWTH1-1230 Yanzi Climate