Manualshelf

User's Manual

ManualsBrandsYanzi Networks ManualsElectronicsComfort
10111213141516171819
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1
Yanzi Networks Installation Manual – Smart Office 13 of 19
7. Installation of Sensors
Sensors are installed using the Yanzi installation tool. Make sure you get login credentials from Yanzi
prior to installation and that the floorplan of the building has been added to the account.
7.1 Start Yanzi Installation tool
1) Using a Chrome browser, go to the link specified by Yanzi, typically something like
https://cirrus5.yanzi.se
2) Sign in using the credentials provided by Yanzi, email and password
3) When logged in, click “Locations” in the left column
4) In the list of locations, click on the location where installation should take place.
5) Click Map to the right of the top bar
6) The floor plan will now open and you are ready to install sensors
The Yanzi installation tool is a cloud based tool so make sure Internet connection is available throughout
the building.
7.2 Installation Procedure
1) Click ”Start Installation” in the top right corner
2) Select floor in the bottom right corner
3) Zoom into area on the floorplan where the sensor should be installed
4) Click on the exact sensor location where the sensor will be installed
5) Add the following properties in the pop-up that is displayed
Device ID. Scan the sensor QR code using the hand scanner.
Example: EUI64-0090DAFFFE00526A
Optional: Height from the floor in [mm]
Example: 1500
Optional: Room name
Example: G51
6) Turn on the sensor
• For battery powered sensors: Pull power switch to ON.
• For USB powered sensor: Insert the USB cable and plug in the power adapter to a wall
socket.
7) Place sensor by removing the non-stick film on the back of the sensors sleeve and place it into
position by pressing FIRMLY on the gray sleeve for 10 seconds (if adhesive tape is used)
8) Restart at point 4 for next sensor
When done, click “Stop Installation” in the top right corner.
Sensors are assigned a radio channel, encryption key, and configuration settings automatically and data
should be available in the Cloud within a few minutes after installation.