User Manual

Yanzi Networks reserve the right to change this specification at any time without notice. Disclaimer: Yanzi Networks can not guarantee that this specification is 100% correct.
Yanzi Plug Product Brief Doc No: 890-07056 Ver: 01 Date: 2015-08-19
Highlights
● Simple to install - single tap encryption
setup
● Remotely turn electrical appliances on
and off or set schedules for automatic
control
● Monitor energy consumption of
electrical appliances remotely
For instructions and information about safety, warranty, and recycling, please visit
www.yanzinetworks.com
Getting started
Two steps to get started
1. Plug into power outlet
2. Accept over Cirrus or in Yanzi App
You are now ready to interact with your
Yanzi Plug
Specifications
Power
● Plug and socket types: CEE 7/4,
Type F for European market
● Wide range input voltage
110 - 230VAC, 50-60Hz
● Maximum load power:
2300W, 10A@230V (Resistive Load)
30W, 0.13A@230V (Inductive Load)
● Contact resistance max 100mΩ
● Endurance 10,000 switches
● Built-in over-temperature protection
● Internal power consumption is less
than 0.5W with relay off
Measurement Accuracy
● Minimum detectable power 0.5W
● Accuracy ±5% (0.5 - 5W load)
±4% (5 - 2300W load)
Wireless Performance:
● IEEE 802.15.4 2.4GHz IPv6 Sensor
Network supporting Mesh Technology
● Wireless Output Power
3dBm - 8dBm (~2 - 6.3mW)
● Wireless Range 5-25m indoor,
50 - 100m Line of Sight (Indicative)
● Omnidirectional internal antenna,
0.5dBi peak gain
● ECC/AES encryption. High security with
unique encryption keys for each Yanzi Plug
- automatically installed at setup
Environmental Requirements
● Operating Requirements 0°C to +50°C,
20 - 80% RH(non-condensing)
Indoor use only
● Storage Requirements 0°C to +50°C,
20 - 80% RH(non-condensing)
External Button
● Status (short press)
● On/off (press and hold for >2 s)
● Reset (press and hold for >20 s)
Dimensions
● 43.5 x 76 x 81mm (including AC pins)
Ordering Information
STW1-E216 Yanzi Plug