User's Manual

Yanzi Networks reserve the right to change this specification at any time without notice. Disclaimer: Yanzi Networks can not guarantee that this specification is 100% correct.
Yanzi Motion Product Brief Doc No: 890-07054 Ver: 02 Date: 2015-09-02
Highlights
Simple to install - single tap encryption
setup
Provides motion detection and
temperature
Easily mounted on walls using the
included wall mount arm or standing
on a shelf
For instructions and information about safety, warranty, and recycling, please visit
www.yanzinetworks.com
Getting started
Two steps to get started
1. Plug in batteries
2. Accept over Cirrus or in Yanzi App
You are now ready to interact with your
Yanzi Motion
Specifications
PIR Based Motion Detection
Up to 10m motion detection distance
90° Vertical field of detection
100° Horizontal field of detection
Temperature Measurement
Range -20°C to +50°C
Tolerance ±1°C
Power
4 pcs of 1.5V AA Lithium Li-Fe or
4 pcs of 1.5V AA Alkaline batteries
Battery lifetime expectancy up to 10 years*
Wireless Performance:
IEEE 802.15.4 2.4GHz IPv6 Sensor
Network supporting Mesh Technology
Wireless Output Power
3dBm - 8dBm (~2 - 6.3mW)
Wireless Range 5-25m indoor,
50 - 100m Line of Sight (Indicative)
Omnidirectional internal antenna,
0.5dBi peak gain
ECC/AES encryption. High security with
unique encryption keys for each Yanzi
Motion - automatically installed at setup
Environmental Requirements
Operating Requirements -30°C to +60°C,
0 - 100% RH(non-condensing)
Indoor and protected outdoor
Storage Requirements 0°C to +50°C,
20 - 80% RH(non-condensing)
IP54 protection
Designed for vertical mounting
when outdoors
External Buttons
Status (press to show status on LED)
Reset (press and hold for >20 s)
Dimensions
96 x 58 x 29 mm (excluding sleeve)
96 x 62 x 56 mm (including sleeve)
* To ensure long battery life, Lithium batteries are required,
especially in conditions with temperatures below 0°C. Amount
of activity may affect battery lifetime.
Ordering Information
MDW1-0201 Yanzi Motion