Doc No: 890-03084 Date: 2017-03-24 Rev 9 Installation Manual – Smart Office This installation manual describes how to install Yanzi IoT infrastructure and sensors in smart offices.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 Table of Contents Disclaimer .......................................................................................................................................................... 4 1. 2. Introduction ............................................................................................................................................... 5 1.1 Best Technology ................................................................................................
Doc No: 890-03084 Date: 2017-03-24 Rev 9 11. Post Installation ..................................................................................................................................... 24 12. Troubleshooting ..................................................................................................................................... 25 13. IEEE 802.15.4 Overview ........................................................................................................................ 26 14.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 Disclaimer Information in this document is subject to change without notice and does not represent a commitment on the part of Yanzi Networks. The document is provided “as is,” without warranty of any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular purpose.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 1. Introduction Yanzi Networks delivers an end-to-end, horizontal, and all-IP software Internet of Things platform. We offer sensors, gateways, and Cirrus, a cloud platform solution packaged into a Software as a Service solution (SaaS) for Smart Building applications. The horizontal and all-IP approach provides a solution that is fast, robust, and transformative. 1.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 2. Installation Planning 2.1 Infrastructure The infrastructure has two parts: The Gateway and the IoT network. The Gateway is the brains of the system and manage all sensors, collects all data, and keeps a communication channel open to the Cloud. The IoT network is required to enable sensors to communicate with the Gateway. The IoT network is completely built on IP communication, same as on the Internet.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 Partner Cloud Servers Partner Cloud Servers 3G/4G/LTE 3G/4G/LTE Customer Firewall or Mobile Broadband Router Yanzi IoT Gateway 4G Yanzi Sensors Yanzi IoT Gateway Yanzi Sensors Large system reusing Ethernet infrastructure in building and where Internet connectivity can be provided by sharing a port on the existing firewall or using an external mobile broadband router.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 • Optional UPS on PoE switch and Gateway to enable operation when power is lost Large system completely stand-alone without using any existing infrastructure. Secure Cirrus API Partner Cloud Servers Cloud Servers 3G/4G/LTE Yanzi IoT Gateway 3G/4G Yanzi Sensors Yanzi Networks IPv6 over IEEE 802.15.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 2.2 Use Cases Depending on which use case to cover, the type and position of sensors may vary. Two typical use cases are shown below for space utilization and comfortability. 2.2.1 Space Utilization For space utilization, Yanzi Motion/Presence sensors are added under the table at each work desk chair and at each chair of larger conference rooms (typically rooms with 6 chairs or more) to detect usage.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 M M Yanzi Motion+ Motion, Temperature, Humidity, Ambient Light, Ambient Noise (Sampled) A Yanzi Comfort CO2, VOC, Temperature, Humidity, Air Pressure, Ambient Noise (Continuous) A A A M A A A A M A M M M Conference/Phone Rooms Work Desks/Hot Desks M M A M M M M A Restrooms M Dining Area 2.3 Installation Tool One of the important parts after the installation is to know where sensors have been placed.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 3. Installation of Infrastructure Gateways are recommended to be peered prior to installation. Peering means connecting the Gateway to a specific account. Users can then be added or removed from this account to control access. Peering is done using the installation tool or provided as remote support by Yanzi. Yanzi needs the Gateway ID (printed on the Gateway label), the location name it should have, as well as a user with administrative rights for this account.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 3.1 Yanzi IoT Gateway overview and installation The following applies to all variants of Yanzi IoT Gateway (DR2-88xx) and Yanzi IoT Gateway Plus (DR2-89xx). For more details on gateway LED behavior, see section 3.3. Installing and peering a gateway 1. Insert the included power adapter to a power outlet and plug in the cable to the gateway. The power LED should now turn solid green. 2.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 3.2 Gateway Functions Port Desription Power Port Only use Yanzi Wall Adapter according to Gateway datasheet, typically 12V/2A. Ethernet Port 1x 10/100 Ethernet port (DR2-88xx) 2x 10/100 Ethernet ports (DR2-89xx) UPS Switch Enables/disables built-in battery backup. Push to front to disable. Push towards rear to enable. Power/Status LED Indicates power status according to section 3.3. USB Port Reserved. Do not use.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 3.3 Gateway LED Behavior Yanzi IoT Gateway and IoT Gateway Plus both have a dual color LED that can indicate green or orange. The typical LED behaviors are shown in the table below.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 4. Teams and Equipment Most efficient is usually to have installer teams of 2-3 persons. Multiple teams can work in parallel for quicker sensor installations. 1 person places the sensor on the floor map and scans the QR code. 1-2 persons place the sensor on the correct spot in the building.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 5. Sensor Handling Tips 5.1 Battery lid To open and close the battery lid, gently push the back side label close to the battery lid with your thumb and slide the battery lid downwards with your other hand. 5.2 Sensor element The sensor elements must be handled with care as these are sensitive parts. 5.3 Battery insertion The battery powered sensors operate with 4 batteries, note the polarity when inserting the batteries.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 6.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 7. Installation of Sensors Sensors are installed using the Yanzi installation tool. Make sure you get login credentials from Yanzi prior to installation and that the floorplan of the building has been added to the account. 7.1 Start Yanzi Installation tool 1) Using a Chrome browser, go to the link specified by Yanzi, typically something like https://cirrus5.yanzi.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 7.3 Yanzi Footfall Camera Overview and Installation General requirements The Yanzi footfall camera must: • Be mounted with the correct orientation • Be in an area where, preferably, people do not stagnate • Be in a place with adequate illumination • Be outside of the door opening area Depending on the ceiling height, the width the camera will be able to count varies as shown in the illustration and in the chart below. Height (A) 2.5m 3.0m 4.0m 5.0m 6.0m 7.0m 8.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 Ensure that the door won’t open directly under the cameras counting line. Installation and configuration 1. Mount the camera in the ceiling, having considered the requirements listed above. Make sure you connect the camera using an PoE switch as it gets power over Ethernet. Please note that the footfall camera must be connected to the same network as the Yanzi Gateway 2.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 8. Wireless For high speed devices, Ethernet and WiFi is the typical communication mediums used. For very low power devices such as battery driven devices, a sister protocol to WiFi is used that is called the IEEE 802.15.4. IEEE 802.15.4 has about the same range as WiFi and normally operates on the same ISM band, 2.4GHz. There are Sub-GHz solutions for IEEE 802.15.4 as well but for normal high density installations, it is not required for reach.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 9. Working with Sensors 9.1 LED Behavior All sensors have a dual color LED that can indicate green or orange. The typical LED behaviors are shown in the table below. Sensor LED State Description Note Off Power is off or sensor is in sleep All sensor turn the LED off a short while after power has been applied to avoid light pollution. A short press on the button turns the LED on to display status if sensor has power (see section 5.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 10. Battery Requirements It is very important to follow these guidelines to avoid serious injuries. Bad handling of batteries may cause them to leak, potentially rapidly, creating a risk of injury as the internals of batteries are very corrosive. It is recommended to use Alkaline batteries in most use cases and Lithium (LiFeS2) for cold use cases. • • • • • • • Note the polarity of the batteries when inserting them.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 11. Post Installation Following the successful completion of the Yanzi smart building installation, we recommend you to send an internal email to all company team members informing them of the reasons for the installation. It is important is to explain the purpose of the installation and to clarify that no images, video, or sound is ever recorded and that their privacy is respected and maintained at all time.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 12. Troubleshooting Behavior Solution Note Gateway won't connect Ethernet-based gateways Yanzi IoT Gateway: 1. Ensure Ethernet cable is plugged in 2. Verify gateway is receiving power and is turned on Yanzi IoT Gateway Plus: 1. Ensure Ethernet cable is plugged in to the righthand port 2. Verify gateway is receiving power and is turned on. If using PoE, double-check your switch is providing power over Ethernet. Yanzi IoT Gateway Rack: 1.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 13. IEEE 802.15.4 Overview IEEE 802.15.4 is a low power wireless network optimized for battery driven devices. On the worldwide approved 2.4GHz spectrum, it supports 16 channels with 250kbps per channel where each channel has a bandwidth of 2MHz. IEEE 802.15.4 World-Wide A comparison with WiFi, IEEE 802.11b, can be seen on the below picture. IEEE 802.11b uses 11 channels in US and 13 channels in Europe with a bandwidth of 22MHz per channel.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 14. Disposal and Recycling Information This symbol indicates that your product must be disposed of properly according to local laws and regulations. When your product reaches its end of life, contact Yanzi or your local authorities to learn about recycling options. 15.
Doc No: 890-03084 Date: 2017-03-24 Rev 9 The information below relates to the following product - Yanzi IoT Gateway Plus, DR2-8910 For your own safety, and in terms of the RF exposure requirements of the FCC, always observe these precautions: - Always maintain a minimum separation distance of 20 cm (7.8 inches) between yourself and the radiating antenna. - Do not co-locate the antenna with any other transmitting device.
