User Guide

Yanzeo AR180 User Guide

1. Scanning: Press the scan button to turn the device on and wait for the ((((0)))) display

then start scanning your pet – you ONLY get 10 seconds, or you have to press the button

again to restart.

a. If tag is found within 10 seconds its number will be displayed – immediately press the

scan button once more while the number is still displayed to save it to the device memory.

b. If no tag is found before the 10 seconds time out – or a tag does not exist, the display

shows the ‘No tag’ message.

2. Uploading STORED contents to a program on your computer: Open a document,

spreadsheet, Notepad, etc., attach the USB cable and hold the scan button down for 3

seconds, ‘Uploading…’ will be displayed during the process and ‘Upload OK!’ displayed

when finished.

3. Direct uploading if single scans: Connect a USB cable to your device and when the

computer’s cursor is flashing in the input field or form where you would normally type the

number scan your pet and if a chip is found the number will be sent to the computer.

4. To turn scanner off: The scanner will turn itself off after 128 seconds of inactivity.

5. Charging: Connect the USB cable and plug into any USB charger.

This device works for both home users as a hand-held only scanner or

semi-professional to input data into a record use once you understand it.

This scanner is designed as a ‘keyboard interface/input device’ meaning that when

connected by a USB cable to your computer it will send or ‘type’ the displayed or stored

characters whatever document or form you have open and enter them where the cursor is

PAGE 1
Yanzeo AR180 User Guide 1. Scanning: Press the scan button to turn the device on and wait for the ((((0)))) display then start scanning your pet – you ONLY get 10 seconds, or you have to press the button again to restart. a. If tag is found within 10 seconds its number will be displayed – immediately press the scan button once more while the number is still displayed to save it to the device memory. b.
PAGE 2
flashing. Example: where they say you can press the scan button to ‘upload’ the scans, have Notepad or a word processing document open and the device will it will print its stored output of numbers there. If you have a USB cable connected when you perform a scan, the output for that single scan will be sent to whatever document or input form you have open.