Specifications

CHANGING FUSES
There are two or four fuses in the marine
generator system, depending on the
number of power boxes installed. One is
located on each control panel and one on
each power box. All fuses are rated the
same.
(1)
0004649
(1)
0004650
1. Disconnect battery cables, beginning
with negative (-) cable first, or turn
battery master switch (if equipped) to
OFF.
2. Turn the cap of the fuse holder with a
screwdriver.
3. Remove the fuse.
4. Replace with a new fuse of the
specified rating.
Fuse Specification
250V-5A : 5mm x 20 mm
5. Install cap and tighten with a
screwdriver. Do not over-tighten.
MAINTENANCE
KMG65E Operation Manual 33