Specifications

Checks During Operation
• Check the indicators on control panel(s) from time to time during operation.
• Check that Power Box is Running indicator is illuminated and that no warning indicators
are lit. NOTICE: NEVER allow the system to run when a warning indicator is illuminated.
Damage to equipment may result.
Indicator State Remarks
Inv Temp.
MORE SPEED
OVERLOAD
OFF ON
Gen Temp.
0004616
Power Box is
Running Indicator
System is running
normally
Inv Temp.
MORE SPEED
OVERLOAD
OFF ON
Gen Temp.
0004617
Insufficient Engine
Speed Warning
Indicator
Insufficient engine
speed
Increase engine speed
or decrease load.
Inv Temp.
MORE SPEED
OVERLOAD
OFF ON
Gen Temp.
0004618
Insufficient Engine
Speed Warning
Indicator and
Generator
Temperature
Warning Indicator
Overload The timer starts and the
system will stop
automatically
according to the load
level.
Inv Temp.
MORE SPEED
OVERLOAD
OFF ON
Gen Temp.
0004619
Generator
Temperature
Warning Indicator
Generator temperature
is too high
The system stops
automatically. Correct
the problem and reset
the system.
Inv Temp.
MORE SPEED
OVERLOAD
OFF ON
Gen Temp.
0004620
Power Box
Temperature
Warning Indicator
Power box temperature
is too high
The system stops
automatically. Correct
the problem and reset
the system.
See Troubleshooting Chart on page 35 to troubleshooting warning LEDs. If the system
stops automatically due to overload or temperature protection function, correct the problem
and reset the system by turning the switch OFF and restarting.
OPERATION
26 KMG65E Operation Manual