Specifications
Table Of Contents
- Table of Contents
- Introduction
- Safety
- Product Overview
- Before You Operate
- Engine Operation
- Periodic Maintenance
- Introduction
- Safety Precautions
- Precautions
- EPA Maintenance Requirements
- Periodic Maintenance Schedule
- Periodic Maintenance Procedures
- Daily Checks
- After Initial 50 Hours of Operation
- Every 50 Hours of Operation
- Every 100 Hours of Operation
- Every 150 Hours of Operation
- Every 250 Hours of Operation
- Draining the Fuel Tank
- Replacing the Engine Oil Filter Element
- Changing the Marine Gear Oil
- Checking or Replacing the Seawater Pump Impeller
- Cleaning the Intake Silencer (Air Cleaner) Element
- Cleaning or Replacing the Exhaust / Water Mixing Elbow
- Adjusting the Alternator V-ribbed belt Tension
- Cleaning the Breather Pipe
- Checking the Wiring Connectors
- Every 1000 Hours of Operation
- Troubleshooting
- Long-Term Storage
- Specifications
- System Diagrams
- EPA Warranty USA Only
- Emission System Warranty
SPECIFICATIONS
88 YM Series Operation Manual
Marine Gear and Sail Drive
Specifications
Model KM2P-1(S) KM2P-1(G) KM2P-1(GG)
SD20
(coupled at boat
builder)
Type Mechanical cone clutch Dog Clutch
Reduction Ratio
(Forward / Reverse)
2.21 / 3.06 2.62 / 3.06 3.22 / 3.06 2.64 / 2.64
Propeller Speed
(Forward / Reverse)
*
1580 / 1140 min
-1
1332 / 1140 min
-1
1083 / 1140 min
-1
1322 / 1322 min
-1
Lubrication System Splash Oil bath
Lubricating Oil Capacity
(Total)
0.3 L (0.32 qt)
2.2 L (2.3 qt)
Standard
2.5 L (2.6 qt)
Long Reach
Lubricating Oil Capacity
(Effective)
0.05 L (0.05 qt) 0.15 L (0.16 qt)
Cooling System Air cooling by fan on flywheel -
Weight 10.3 kg (27.7 lb) 30 kg (66.1 lb)
* At continuous power engine speed 3489 min
-1
.
YM OPM_EN.book 88 ページ ２０１３年６月７日 金曜日 午前１１時１１分