Specifications
Table Of Contents
- Table of Contents
- Introduction
- Safety
- Product Overview
- Before You Operate
- Engine Operation
- Periodic Maintenance
- Introduction
- Safety Precautions
- Precautions
- EPA Maintenance Requirements
- Periodic Maintenance Schedule
- Periodic Maintenance Procedures
- Daily Checks
- After Initial 50 Hours of Operation
- Every 50 Hours of Operation
- Every 100 Hours of Operation
- Every 150 Hours of Operation
- Every 250 Hours of Operation
- Draining the Fuel Tank
- Replacing the Engine Oil Filter Element
- Changing the Marine Gear Oil
- Checking or Replacing the Seawater Pump Impeller
- Cleaning the Intake Silencer (Air Cleaner) Element
- Cleaning or Replacing the Exhaust / Water Mixing Elbow
- Adjusting the Alternator V-ribbed belt Tension
- Cleaning the Breather Pipe
- Checking the Wiring Connectors
- Every 1000 Hours of Operation
- Troubleshooting
- Long-Term Storage
- Specifications
- System Diagrams
- EPA Warranty USA Only
- Emission System Warranty
PERIODIC MAINTENANCE
YM Series Operation Manual 73
12/05
Checking and Adjusting the Remote
Control Cables
See Checking and Adjusting the Remote
Control Cables on page 63.
Adjusting the Propeller Shaft
Alignment
Consult authorized Yanmar Marine dealer
or distributor.
Tightening All Major Nuts and Bolts
See Tightening Fasteners on page 52 or
consult authorized Yanmar Marine dealer
or distributor.
YM OPM_EN.book 73 ページ ２０１３年６月７日 金曜日 午前１１時１１分