Specifications
Table Of Contents
- Table of Contents
- Introduction
- Safety
- Product Overview
- Before You Operate
- Engine Operation
- Periodic Maintenance
- Introduction
- Safety Precautions
- Precautions
- EPA Maintenance Requirements
- Periodic Maintenance Schedule
- Periodic Maintenance Procedures
- Daily Checks
- After Initial 50 Hours of Operation
- Every 50 Hours of Operation
- Every 100 Hours of Operation
- Every 150 Hours of Operation
- Every 250 Hours of Operation
- Draining the Fuel Tank
- Replacing the Engine Oil Filter Element
- Changing the Marine Gear Oil
- Checking or Replacing the Seawater Pump Impeller
- Cleaning the Intake Silencer (Air Cleaner) Element
- Cleaning or Replacing the Exhaust / Water Mixing Elbow
- Adjusting the Alternator V-ribbed belt Tension
- Cleaning the Breather Pipe
- Checking the Wiring Connectors
- Every 1000 Hours of Operation
- Troubleshooting
- Long-Term Storage
- Specifications
- System Diagrams
- EPA Warranty USA Only
- Emission System Warranty
Disclaimers:
All information, illustrations and specifications in this manual are based on the latest
information available at the time of publishing. The illustrations used in this manual
are intended as representative reference views only. Moreover, because of our
continuous product improvement policy, we may modify information, illustrations
and/or specifications to explain and/or exemplify a product, service or maintenance
improvement. We reserve the right to make any change at any time without notice.
Yanmar and are registered trademarks of YANMAR CO., LTD. in
Japan, the United States and/or other countries.
All Rights Reserved:
No part of this publication may be reproduced or used in any form by any means -
graphic, electronic, or mechanical, including photocopying, recording, taping, or
information storage and retrieval systems - without the written permission of
YANMAR CO., LTD.
MODEL
OPERATION MANUAL
CODE
All Rights Reserved, Copyright
2YM15, 3YM20, 3YM30E, 3YM30
0AYMM-G00202