Instructions / Assembly

CODE PARTS

QTY. CODE PARTS QTY.

PARTS LIST

HARDWARE LIST

4PCS

2-1

4PCS

READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY

1.PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.

2.TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.

3.PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.

4.WASHERS MUST BE USED.

5.WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT.

6.DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.

1PC

ASSEMBLY INSTRUCTIONS

STEEL COFFEE TABLE

1PC

PAGE 1
STEEL COFFEE TABLE ASSEMBLY INSTRUCTIONS ! READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY 1.PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED. 2.TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR. 3.PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS. 4.WASHERS MUST BE USED. 5.WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT. 6.DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.
PAGE 2
ASSEMBLY INSTRUCTIONS Step1:Install all the relevant screws,but do not tighten them completely at the very beginning. Step2:Tighten the screws fully one by one. Don't tighten up the screw before you start next mounting during the installation. Step 2 Step 1 2 1 D E B C A max 50lbs 75 kg 3 4 F G D E D E Adjust for un-even ground CARE AND CLEANING: 1、TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS OR FRAME PARTS.