Instruction manual

VG3511-8F

6. Adjustments

6.4.3 Top cover thread eyelet

6.4.2 Top cover thread guide

(1) Loosen the screw ⑥ of the top cover thread eyelet ⑤ .

（Fig. 6-12)

(2) Make the clearance between the top of the top cover

thread guide ① and the top cover thread eyelet ⑤ to

1.0 ㎜ when the needle bar is at the lowest point. (Fig.

6-11)

(3) Set the eye of the top cover thread eyelet ⑤ along the

extending line from the slot of the top cover thread

guide ① . (Fig. 6-12)

(4) Tighten the screw ⑥ securely. (Fig. 6-12)

(1) Loosen the screws ② of the top cover thread guide ① .

(Fig. 6-11)

(2) Make the clearance between the top of the spreader ③

and the bottom of the top cover thread guide ① to 0.5

㎜ . (Fig. 6-11)

(3) Set the hook ④ in the center of the slot of the top

cover thread guide ① when the spreader ③ is at the

extreme right. Then, tighten the screws ② securely.

(Figs. 6-11 and 6-12)

Fig. 6-11

Fig. 6-12

0.5 ㎜

1.0 ㎜

①

⑤

②

③

⑤

③

①

⑤

⑥

③

④