Instruction manual

VG3511-8F

6. Adjustments

6.4 Needle and spreader

(1) Loosen the screws ③ and ④ of the spreader holder.

(Fig. 6-10)

(2) Make the clearance between the left needle and the

hook ② of the spreader ① to 0.5 - 0.8 ㎜ . (Fig. 6-8)

(3) Make the clearance between the center of the left nee-

dle and the hook ② to 4.5 - 5.5 ㎜ when the spreader

① is at the extreme left. Then tighten the screw ④

securely. (Figs. 6-8 and 6-10)

(4) Make the height from the top of the stitch plate to the

bottom of the spreader ① to 8.5 - 9.5 ㎜ . Then tight-

en the screw ③ securely. (Figs. 6-9 and 6-10)

6.4.1 Spreader

Fig. 6-8

Fig. 6-9

Fig. 6-10

③

④

①

②

0.5 - 0.8 ㎜

4.5 - 5.5 ㎜

8.5 - 9.5 ㎜

stitch plate

①

Adjust the height of the spreader so that the top cover

thread passes behind the right needle and is caught by

the left needle within adjustable range based on the nee-

dle distance.

ATTENTION