Instruction manual

17
VG3511-8F
5.9 Hemming guide(left)
Fig. 5-12
Fig. 5-13
5.10 Trimming width of fabric
(1) Loosen the screw ② of the hemming guide(left) .
(2) Align the right on the guiding part of the hemming
guide(left) ① with that of the upper knife .
(3) Tighten the screw ② securely.
Install or remove the folder spacer on the guiding part
of the hemming guide(left) to change the trimming width
of a fabric.
When sewing with the folder spacer , the trimming width
is 3.0 ㎜ .
When sewing without it, the trimming width is 5.0 ㎜ .
Remove the screw ④ to remove the folder spacer .
5. Proper operation
aligned
See “7.1 Adjusting trimming position of fabric ”to ad-
just the right-and-left position of lower fabric.
 
SUPPLEMENT