Specifications
YCO-1127-12-08
PPC-300WP Operation Manual
Danger - To Avoid Fire and Electric Shock
Do not operate the scale if there is smoke or a burnt smell coming from the scale. Remove the
batteries or unplug the AC adaptor immediately. After making sure there is no danger, consult
your dealer. Never try to repair the scale yourself!
Warning
Do not step or sit on the scale. This will damage the scale and you could be injured.
Do not insert your ngers into gaps or holes in the scale. You could be injured.
If the LCD display should break, do not touch the liquid or broken glass from the LCD. The liquid
is toxic if ingested, and the glass can be sharp. Be especially careful around children.
Do not short, submerge or heat the batteries. They could burst and leak corrosive chemicals.
Place the item to be weighed in the center of the platform. Items placed on the edge of the plat-
form may fall off and cause injury or damage.
When weighing a heavy, large or unbalanced item, make sure the item is stable on the platform to
prevent injury or damage.
Place the scale on a stable, level surface to prevent injury or damage.
Caution
Do not lift or carry the scale by the platform. This can damage the scale. Carry and lift the scale
with both hands using the hand grips on the bottom of the scale.
Do not twist the platform. This can damage the scale.
Do not shock load the scale. This can damage the scale.
Do not push the indicator or keys with sharp objects. They can puncture or break the switch
membrane panel, voiding the watertight seal.
This scale is a sensitive weighing instrument, avoid physical shocks. If you drop something on
the scale, overload the scale, step on the platform, or drop the scale, the scale may be dam-
aged and lose accuracy.
Never open the housing. The electronics may be damaged and you may be injured by sharp
edges on the internal parts.
Do not open the battery lid in extremely dusty environments. Dust could stick to the battery lid
seal and prevent a watertight seal when the lid is closed.
Do not place the scale upside down. This could damage the load cell.
Do not lick or place batteries in the mouth.
If the housing is opened or screws loosened, the water-tight seal must be tested after reassembly
to ensure no leaks are present before exposing the scale to liquids.
Use the specied adapter or batteries, and choose a suitable environment. If you do not, the
weight readings may be inaccurate and the scale may be damaged.
When the low battery indicator appears, replace all four of the batteries. When installing the bat-
teries, install them according to the polarity markings in the case (+, -). If the scale will not be
used for a long period, remove the batteries. Do not mix alkaline and manganese batteries.
After changing batteries, wipe the battery lid seal with a damp cloth to remove foreign matter that
could prevent a watertight seal. Fasten the battery lid tightly.
Keep batteries out of the reach of small children.
Dispose of batteries in accordance with all applicable regulations.
I Introduction
2