Specifications

YCO-1127-12-08

PPC-300WP Operation Manual

Checkweighing Function

Once the checkweighing function is enabled, the lower limit and upper limit need to be setup.

Setup

1. With the scale on and the platform empty, press the key for one

second. The scale will indicate that it is in checkweighing setup mode

and the indicator will ash.

2. Up to 99 different congurations can be stored in memory. Initially,

the scale will display conguration 01. Use the and keys to

select the desired conguration. Example: Press the key four

times to select conguration 05.

3. Press the key to enter the lower limit weight setting, or (if the con-

guration has already been setup) press the key to exit setup and

begin weighing.

4. Use the key to select a digit to change, and the and keys

to decrease or increase the digit's value. Example: Press the

key three times to select the fourth digit. Press the key once to

change the digit to "1".

5. Press the key to enter the lower limit weight and progress to the

upper limit weight. The acceptable weight range is any weight be-

tween the upper and lower limits, inclusive.

6. Use the key to select a digit to change, and the and keys

to decrease or increase the digit's value. Example: Press the key

once to select the second digit. Press the key twice to change the

digit to "2". Press the key again to select the next digit. Press the

key ve times to change the digit to "5". Press the one more

time and then press the key once to change the digit to "1".

7. Press the key to enter the upper limit weight setting and exit setup

mode. If either limit is set to zero, the scale will display "FAULT".

IV Using the Scale