Specifications
YCO-1047-03-13
PPC-200(W) Operation Manual
I Name and Function of Parts
1) ON/ZERO Key Turns the power on, and zeroes the display.
2) OFF Key Turns the power off.
3) TARE Key Tares off the weight on the scale platform.
4) NET/GROSS Key Toggles between gross and net weights.
5) Unit selection Press both keys simultaneously to toggle between pound and
kilogram indications.
6) LOW BATTERY Indicator Time to replace batteries.
7) Spirit level device Used to level scale.
8) CENTER ZERO Indicator Indicates scale is at gorss zero.
9) STABLE Indicator Indicates that weight on the scale is stabilized.
10) MODE Indicator Indicates scale is in setup mode and weighing is not allowed.
11) NET WEIGHT Indicator Shows scale is in net mode.
12) GROSS WEIGHT Indicator Shows scale is in gross mode.
13) CAL Indicator Shows scale is not sealed for legal for trade operation.
14) Battery Cover Tighten securely to maintain washdown seal.
15) Outlet of AC adaptor cable Use of an AC adapter voids washdown seal.
16) Levelling Legs Rotate to level the scale.
Fig. 1: Front side of the scale Fig. 2: Bottom of the scale
1
Weighing system: Strain-gauge load cell
Platform: 9” x 9” (230 x 230 mm), stainless steel
Weight display: Single face display
Type: 7 segment LCD
Character size, etc.: 0.5” (12 mm) (W) x 0.9” (23 mm) (H), 5 digits
Optional equipment: Batteries, AC adaptor, Analog limit meter *
Power supply: 6 “D” size batteries or AC adaptor*
Consumption: 0.12 W (max.)
Battery life: 1000 hours of continuous use (when using alkaline batteries)
Operating temperature: 14°F to 104°F (-10°C to 40°C)
Operating humidity: 25% to 85% RH
Waterproof classication: PPC‑200W complies with JIS class 5 standard (drip‑proof V type)
PPC‑200 complies with JIS class 2 standard (drip‑proof II type)
II Specications
* The scales is NOT washdown if it has been modied for the analog meter or if the AC jack seal has
been removed.