DP-6200 Technical Manual YAMATO CORPORATION 1775 S. Murray Blvd. Colorado Springs, CO 80916 USA Tel (719) 591-1500 Fax (719) 591-1045 YAMATO TECH CORPORATION #112-19425 Langley By-Pass Surrey, B.C.
DP-6200 Technical Manual Table of Contents I. Safety Instructions 1 II. Description Name and Function of Parts Specifications 2 III. Calibration 5 IV. Changing the Scale Setup Changing Parameters User Mode Test Mode System Mode Factory Mode Standard Parameter Tables Parameter Descriptions 6 V. Troubleshooting 17 VI. Wiring Diagram 19 VII.
DP-6200 I Technical Manual Safety Instructions Before using the scale, carefully read, understand, and follow the “Safety Instructions” described in this manual. Observe the advice given in the “Directions for Use” section to ensure proper operation. Keep this operation manual handy for reference. To prevent injury 1) DO NOT SHOCK LOAD the scale, Never step on or sit on the scale. Not only will the scale be damaged, but you may also be injured.
DP-6200 Technical Manual II Description Name and Function of Parts ��������� ��� ���� ������ ���� ����� ���� ������ ����� ����� ������ ������� �������� ����� ������� ������ ������ ������� ���� ����� ��������� ���� �������� �������� FIG. 1 FIG. 2 ���������� ����� ����� ������� ��� ����� ���������� ������ ���������� ���� �������� ������ ���� ��������� �������� FIG.
DP-6200 Technical Manual II Description Name and Function of Parts � � � � �� �� ���� ������ ����� � ���� ��� ����� � �������� ������������� ������������� ������� �� ��� ��� � ��� ����� ���� � 1) 2) 3) 4) 5) ���� ��� ����� 6) 7) 8) 9) Low Battery Indicator Hold Indicator Test Mode Indicator Stable Indicator LCD Display Unit Indication Over Indicator Accept Indicator Under Indicator Mode Indicator Net Indicator Gross Indicator Center of Zero Indicator Net/Gross Key Decrease Key Unit
DP-6200 Technical Manual II Description Specifications Weighing system: Platform: Weight display: Type: Character size, etc.: Optional equipment: Power supply: Consumption: Battery life: Operating temperature: Operating humidity: Waterproof classification: Capacities and divisions: Kilogram 30 kg x 0.01 kg 60 kg x 0.02 kg 150 kg x 0.05 kg Strain-gauge load cell 13.8” x 19.7” (350 x 500 mm), stainless steel Single face display 7 segment LCD 0.5” (12 mm) (W) x 0.
DP-6200 Technical Manual III Calibration The DP-6200 can be setup to be calibrated with pound weights or with kilogram weights. Check the setting of system parameter 78 (see section IV - Changing the Scale Setup). 000 sets the scale to be calibrated with kilogram weights, 001 sets the 60 lb and 300 lb scales to be calibrated with pound weights, and 002 sets the 150 lb scale to be calibrated with pound weights.
DP-6200 Technical Manual IV Changing the Scale Setup Changing Parameters The scale setup is controlled by three groups of parameters that determine how the scale operates. These three groups are User Parameters, System Parameters and Factory Parameters. User Parameters (00 - 09) can be changed in both User Mode and System Mode.
DP-6200 Technical Manual IV Changing the Scale Setup User Mode �� With the scale on, press the key to exit the user setup mode. � and keys to enter the user setup mode. Press the ��� Test Mode Open the indicator housing by pulling the release tab forward and swinging the front panel of the housing forward. Short the two test pins to the right of the CPU on the main board. The Test Mode � ennunciator and internal counts will display.
DP-6200 Technical Manual IV Changing the Scale Setup Standard Parameter Settings - User Parameters Key Word 01 02 03 04 05 06 07 08 09 User Parameter Auto-off timer Display hold timer Communication Communication data Communication speed Character length Parity Stop bit length Default mode All Cap.
DP-6200 Technical Manual IV Changing the Scale Setup Standard Parameter Settings - Factory Parameters, Decimal Pounds Key Word 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 91 92 93 94 95 96 97 99 Factory Parameter 30 kg 60 lb Scale Mode 004 Multi-increments 000 Weighing capacity base value 003 Weighing capacity index value 003 Increment for lighter range 000 Location of decimal point 002 Type of decimal point 000 Weighing unit 002 Display of weighing un
DP-6200 Technical Manual IV Changing the Scale Setup Standard Parameter Settings - Factory Parameters, Continuous Ounce Key Word 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 91 92 93 94 95 96 97 99 Factory Parameter 30 kg 60 kg 150 kg 960 oz 2400 oz 4800 oz Scale Mode 007 007 007 Multi-increments 000 000 000 Weighing capacity base value 003 006 015 Weighing capacity index value 003 003 003 Increment for lighter range 000 001 002 Location of decimal poin
DP-6200 Technical Manual IV Changing the Scale Setup Standard Parameter Settings - Factory Parameters, Pound and Ounce Key Word 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 91 92 93 94 95 96 97 99 Factory Parameter 30 kg 60 lb Scale Mode 005 Multi-increments 000 Weighing capacity base value 003 Weighing capacity index value 003 Increment for lighter range 000 Location of decimal point 002 Type of decimal point 000 Weighing unit 002 Display of weighing u
DP-6200 Technical Manual IV Changing the Scale Setup Parameter Descriptions - User Parameters Key Word 01 Std Value 015 Function Auto-off timer 02 000 Display hold timer 03 001 Communication 04 000 Communication data 05 000 Communication speed 06 000 Character length 07 002 Parity 08 001 Stop bit length 09 001 Default mode Description 000 Disables auto-off. 001~240 Number of minutes unused to activate auto-off. 000 No display hold for changes less than four divisions.
DP-6200 Technical Manual IV Changing the Scale Setup Parameter Descriptions - System Parameters Key Word 30 31 Std Value 018 010 Function System ID Gravity compensation 32 000 Linearity compensation 33 34 35 36 37 38 004 012 008 020 004 010 Steady-state sampling count Steady-state count Polarity steady-state count Steady-state collapse count Steady-state average count Zero tracking timing 39 40 001 000 Neglectable change count Simple test mode Description 018 Do not change.
DP-6200 Technical Manual IV Changing the Scale Setup Parameter Descriptions - Factory Parameters Key Word 51 Function Scale mode 52 Multi-increments, complex increment mode 53 54 55 Weighing capacity base value Weighing capacity index value Increment for lighter range 56 Location of decimal point 57 Type of decimal point 58 Weighing unit 59 Weighing unit display 60 Weighing capacity base value (pound mode) Weighing capacity index value (pound mode) 61 Description 000 Fixed single incremen
DP-6200 Technical Manual IV Changing the Scale Setup Parameter Descriptions - Factory Parameters (continued) Key Word 62 Function Location of decimal point (lb , oz or lb/oz mode) 63 64 Pound increment Pound conversion coefficient 65 66 67 68 Zero point range Zero point range on plus side Over scale Display hold function 69 70 Hold release against increased weight Stable mark 71 Tare function 72 Zero reset under tare operation 73 Power off with ON key 74 Special function for stability 75
DP-6200 Technical Manual IV Changing the Scale Setup Parameter Descriptions - Factory Parameters (continued) Key Word 78 79 Function Conversion coefficient for pound calibration 80 Center-of-zero ennunciator position toggle Internal resolution 81 1 timer (ms) 82 3 timer (ms) 91 92 93 94 95 96 97 Mechanical zero 1 Mechanical zero 2 Span coefficient 1 (small) Span coefficient 2 (small) Span coefficient 1 (large) Span Coefficient 2 (large) Regional number and gravity for span adjustment Factory sett
DP-6200 Technical Manual V Troubleshooting The scale can check various functions automatically. When a problem is detected, the following messages will be displayed. Solutions are listed in order of decreasing probability and increasing complexity. The batteries are running low. When the batteries are running low, this indicator will come on. Replace all of the batteries with new ones. �� The batteries are low.
DP-6200 Technical Manual V Troubleshooting Weighing sensor error. When the weight detecting circuitry registers an error, this message will be displayed. Turn the power off and then on again. Calibrate the scale. Replace the load cell. Electronic circuitry error. When the operating circuitry registers an error, this message may be displayed. Turn the power off and then on again. Replace the logic board. Calibration points out of range error.
DP-6200 Technical Manual VI Wiring Diagram ������������������������������������������������������������������������������������������������������������������ ��������� ��������� ��� ��� � � ��� � � ��� ��� � ��� ��� ��� ��� ��� ��� � � ��� ��� ��� ��� ��� ������ ������� ���� ���� ������� ��������� ������� ��� ������ ��� � ������ ������� � ������ ���� � ������� ���� � ���� ���� � ������� ���� � ������ ���� � ������������ ���������� ��� ������ ���� �� ��� ������ ���� �� ��� ������ ��� ��� �
� � 20 ��� �� � � � � �� �� �� � � � �� � �� � �� �� �� �� �� �� �� � �� �� �� �� �� ��� �� �� �� �� �� �� �� �� �� �� �� DP-6200 Technical Manual VIIParts List YCO-1112-04-06
DP-6200 Technical Manual VII Parts List 21 YCO-1112-04-06
DP-6200 Technical Manual VII Parts List 22 YCO-1112-04-06
DP-6200 Technical Manual VII Parts List ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 PART NUMBER YAM-1235-620001 YAM-1235-620002 YAM-1235-620003 YAM-1235-620004 YAM-1235-620005 YAM-1235-620006 YAM-1235-620007 YAM-1235-620008 YAM-1235-620009 YAM-1235-620010 YAM-1235-620011 YAM-1235-620012 YAM-1235-620013 YAM-1235-620014 YAM-1235-620015 YAM-1235-620016 YAM-1235-620017 YAM-1235-620018 YAM-1235-620019 YAM-1235-620020
DP-6200 Technical Manual VII Parts List ITEM 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 201 202 203 204 205 206 207 PART NUMBER YAM-1235-620101 YAM-1235-620102 YAM-1235-620103 YAM-1235-620104 YAM-1235-620105 YAM-1235-620106 YAM-1235-620107 YAM-1235-620108 YAM-1235-620109 YAM-1235-620110 YAM-1235-620111 YAM-1235-620112 YAM-1235-620113 YAM-1235-620114 YAM-1235-620115 YAM-1235-620116 YAM-1235-620117 YAM-1235-620118 YAM-1235-620119 YAM-1235-620120
