Specifications

YCO-1093-02-02
Setting the Time
Button#
1 Press the CLOCK button to enter clock mode.
1 Press and hold the CLOCK button for about 3 seconds. The hour will begin blinking.
2&3 Change the hour using the TIMER/T and ALARM/S buttons. Hold down the buttons to go
faster.
4 Press the FAT%/SET button to save the hour and advance to the minutes. The minutes will
begin blinking.
2&3 Change the minutes using the TIMER/T and ALARM/S buttons.
1&4 Press the FAT%/SET button or the CLOCK button to save the time and return to clock mode.
Note: * Seconds are only reset to zero when the time is changed.
Selecting the 12 or 24 Hour Clock (and Primary or Secondary Time on the DF311 only)
Button#
1 Press the CLOCK button to enter clock mode.
1 Repeatedly press the CLOCK button to rotate through 12 hour primary time, 24 hour primary
time, 12 hour secondary time (DF311) and 24 hour secondary time (DF311).
Notes: * indicates the secondary time is selected.
* “AM” and “PM” do not appear when the 24 hour clock is selected.
Setting the Secondary Time (DF311 Only)
Button#
First, set the primary time.
1 Press the CLOCK button to enter clock mode.
1 Repeatedly press the CLOCK button to select the secondary time (12 or 24 hour).
1 Press and hold the CLOCK button for about 3 seconds. The hour will begin blinking.
2&3 Change the hour using the TIMER/T and ALARM/S buttons. Hold down the buttons to go
faster.
4 Press the FAT%/SET button to save the hour and advance to the minutes. The minutes will
begin blinking.
2&3 Change the minutes using the TIMER/T and ALARM/S buttons.
1&4 Press the FAT%/SET button or the CLOCK button to save the time and return to clock mode.
Clock Features
10
CLOCK
ALARM TIMER FAT %
SET START