User Manual

5
Before Using this unit
Requirements for Installati on
4. Do not modify
• Modification of this unit is strictly prohibited.
This could cause a failure.
5. Installation on horizontal surface
• Set this unit to the flattest place. Setting this
unit on rough or slope place could cause the
vibration or noise, or cause t he unexpect ible
trouble or malfunction.
CAUTION!
6. Choose a correct pow e r distribution board or receptacle
• Choose a correct power distribut ion board or recept acle t hat meets t he unit ’s rated elect r ic
capacity.
Electric capacity : 100V AC 3.5A
NOTE)
There could be the case that the unit does not run even after turning ON the power. Inspect
whether the voltage of the main power is lowered than the specified value, or whether other
device(s) us es t he same power lin e of thi s unit. If the phenomena might be f ound, change the
power line of this unit to t he other power line.