Manual

27
The Abort (Forced Stop) Function
Forced Stop Function is for putting the ongoing fixed temperature operation or quick auto-stop
operation or program operation to a stop, and changing to the standby condition that no operation
is selected.
Indication after Step/Step Procedure Explanation
1. Push the MODE key and either the
▼
key or
the
▲
key.
•
.Push the MODE key and press either the
▼
key or
the
▲
key several times to flash on the main
display.
2. Push the
ENTER
key
•
Push the
ENTER
key.
⇒
⇒⇒
⇒
The main display flashes
, while the sub
display shows
.
3. Push the
ENTER
key
In the standby condition before slecting
operation
•
Push the
ENTER
key.
⇒
⇒⇒
⇒
HC200 will be in the standby condition before
selecting operation.