Manual

25
Setting and releasing the Temperature Holding Function
Indication after Step/Step Procedure Explanation
1. Select “Hold function” selection mode
Select the corresponding function. See “
Menu
Functions
” on page 21.
•
Select “Hold Function” selection mode by pressing the
MODE
key.
⇒
⇒⇒
⇒
The sub display shows the present status of the hold
function: when the function has been released, it
shows
and when the function has been set,
it shows
.
2. Push the
ENTER
key
•
Push the
ENTER
key.
⇒
⇒⇒
⇒
The controller turns to the hold function ON/OFF
mode.
⇒
⇒⇒
⇒
The sub display shows
3. Push either the
▼
key or the
▲
key.
•
Set the main display at ON for setting and OFF for
releasing. Push the
▼
key or the
▲
key to flash ON
or OFF on the display.
4. Push the
ENTER
key
or
Screen just before pushing the MODE
MODEMODE
MODE key.
•
Push the
ENTER
key.
•
When you turn on the hold function:
⇒
⇒⇒
⇒
The display shows the temperature measured at the
execution of the hold function.
⇒
⇒⇒
⇒
The sub display flashes.
•
When you turn off the hold function:
⇒
⇒⇒
⇒
The display returns to the screen shown just before
you have pushed the
MODE
key.
Setting Releasing
Releasing Setting
Setting Releasing
(Latest measured
temperature)