Manual

24
Setting and releasing the Alarm
Indication after Step/Step Procedure Explanation
1. Select “Alarm” selection mode
Select the corresponding function. See “
Menu
Functions
” on page 20.
•
Select “Alarm” selection mode by pressing the
MODE
key.
⇒
⇒⇒
⇒
The sub display shows the present status of the
alarm: when the alarm is in inactivity, it shows
and when the alarm is in activity, it shows
.
2. Push the
ENTER
key
•
Push the
ENTER
key.
⇒
⇒⇒
⇒
The controller turns to the alarm ON/OFF mode.
⇒
⇒⇒
⇒
The sub display shows
3. Push either the
▼
key or the
▲
key.
•
Set the main display at ON for setting and OFF for
releasing. Push the
▼
key or the
▲
key to flash ON
or OFF on the display.
4. Push the
ENTER
key
Screen just before pushing the MODE
MODEMODE
MODE key.
•
Push the
ENTER
key.
⇒
⇒⇒
⇒
The display returns to the screen shown just before
you have pushed the
MODE
key.
Setting Releasing
Releasing Setting
Setting Releasing