Manual

22
Changing Sub Display Screens
♦
You can switch the screen on the sub display when HC200 is in the quick auto-stop operation or
the program operation.
♦
You can select/check the preset temperature along with the remaining time before the operation
stop during the quick auto-stop operation. Other selections maybe -- the preset temperature, the
remaining time before the ongoing segment finishes, the parameters of the ongoing segment, and
the remaining number of repeat cycles (possible only during the repeat operation).
Indication after Step/Step Procedure Explanation
1. Push the
MODE
key.
Ex. Information on the preset temperature
display mode.
•
Push the
MODE
key during the quick auto-stop
operation or the program operation.
⇒
⇒⇒
⇒
The controller turns to the sub display screen
changing mode, and the main display flashes
(display).
⇒
⇒⇒
⇒
The sub display shows the description of the
presently set mode.
2. Push the
ENTER
key
•
Push the
ENTER
key.
⇒
⇒⇒
⇒
The controller turns to the sub display setting mode,
and the main display flashes the description that was
shown on the sub display.
⇒
⇒⇒
⇒
The sub display shows
3. Push either the
▼
key or the
▲
key.
•
Push either the
▼
key or the
▲
key.
⇒
⇒⇒
⇒
Every time you push the key, the main display
switches from
(rest for remaining time) and
(ongoing program and ongoing segment) to
(preset temperature) in this order while
flashing them.
! If HC200 is in the repeat operation of a program,
pushing the
▼
key or the
▲
key allows you to check
the remaining number of repeat cycles. In this
instance, the main display flashes
(repeat
count for remaining number of repeat cycles).
4. Push the
ENTER
key
I
ndicating the ongoing program
•
When the sub display shows the information you need,
push the
ENTER
key.
⇒
⇒⇒
⇒
The main display shows the latest measured
temperature.
⇒
⇒⇒
⇒
The sub display shows the information of the set
parameters.
Ex: The example on the left -- the sub display shows
the ongoing program number and the ongoing
segment number.
(Ongoing Segment
Number
)
(Ongoing Program
Number
)