Manual

20
Menu Functions
This paragraph discusses the useful functions contained in the menu. However, discussion
is limited to the indication on the displays with brief explanation when you activate each
function. See corresponding paragraphs for setting and editing those functions.
Indication after Step/Step Procedure Explanation
1. Sub display switching function.
Push the
MODE
key
Sample indication of the sub display information
switching mode.
•
Push the
MODE
key.
⇒
⇒⇒
⇒
If you push the
MODE
key during the operation, the
controller turns to the sub display screen switching
mode.
See “Changing Sub Display Screens” on page. 22.
2. Temperature presetting function
Push the
MODE
key
Sample indication of the preset temperature
registration mode
⇒
⇒⇒
⇒
If you push the
MODE
key when HC200 is ready for
operation or after the operation, the display shows
the parameter set on the preset temperature
registration mode.
See “How to Use Temperature Presetting Function”
on page. :28.
3. Panel key locking system
Push either the
▼
key or the
▲
key.
•
Push either the
▼
key or the
▲
key several times.
⇒
⇒⇒
⇒
The controller turns to the panel key lock selection
mode.
⇒
⇒⇒
⇒
Panel key locking system is provided to prevent
accidental or unauthorized change of the parameters
when HC200 is ready for operation or during the
operation. When the panel key locking system is
turned ON, the keys on the control panel, except the
MODE
key, do not work.
See “Setting and releasing Panel Locking System”
on page 23.
4. Integrated time indicating function
Push either the
▼
key or the
▲
key.
When the integrated time exceeds 10,000 hours
: 10,050hours
: 20,050hours
: 30,050hours
: 40,050hours
•
Push either the
▼
key or the
▲
key several times.
⇒
⇒⇒
⇒
The controller turns to the integrated time indication
mode, and the main display flashes
(accumulation for integrated time)
⇒
⇒⇒
⇒
The sub display shows the integrated service time of
HC200.
! The display show an integrated service time up to
4,999 hours, that cannot be reset.
! When the integrated time exceeds 9,999 hours, as
shown in the example on the left, the dot after each
digit lights up one after another at excess of every
10,000 hours. In other words, one dot light
indicates 10,000 hours.
5. Alarm sound ON/OFF function
Push either the
▼
key or the
▲
key.
•
Push either the
▼
key or the
▲
key several times.
⇒
⇒⇒
⇒
The controller displays the alarm sound ON/OFF
selection mode.
! This function is provided to activate the alarm
sound when something abnormal happens on
HC200.
See “Setting and releasing the Alarm” on page 24.
(Ex. Integrated time at present)
Alarm sound off Alarm sound on
or
Locking system off Locking system on
or