Manual

18
Changing from Program Operation to Fixed Temperature Operation
Indication after Step/Step Procedure Explanation
1. Push the
MENU
key.
•
Push the
MENU
key during the program operation.
⇒
⇒⇒
⇒
HC200 changes to the fixed temperature operation’s
desired temperature setting mode.
⇒
⇒⇒
⇒
The sub display flashes the preset desired
temperature of the latest fixed temperature
operation.
Ex. In the example on the left, the sub display shows
that the previously preset temperature was 56
°
C.
2. Ex., setting the temperature at 60
°
C.
Push either the
▼
key or
▲
key.
•
Push either the
▼
key or
▲
key and set your desired
temperature on the sub display.
! If you do not change the previously preset
temperature; proceed to Step 3.
3.
Push the
ENTER
key.
•
After you set your desired temperature on the sub
display, push the
ENTER
key.
⇒
⇒⇒
⇒
Pushing the
ENTER
key stops the ongoing program
operation, and operation mode switches to the fixed
temperature operation.
⇒
⇒⇒
⇒
The temperature on the sub display changes from
flashing to steady lit, and HC200 starts the fixed
temperature operation.
⇒
⇒⇒
⇒
The
PROGRAM
lamp goes out, and the
FIXED
-
TEMP
lamp turns from flashing to steady lit.