Manual

16
Indication after Step/Step Procedure Explanation
4. Push the
ENTER
key.
⇒
⇒⇒
⇒
Pushing the
ENTER
key changes the operation
mode from the fixed temperature operation to the
auto-stop operation.
⇒
⇒⇒
⇒
The main display shows the latest measured
temperature.
⇒
⇒⇒
⇒
The sub display shows either the remaining time
before operation stop or the preset temperature.
Ex: In the example on the left -- the sub display shows
the remaining time.
! When you want to check the preset temperature,
switch the sub display information. (See “Changing
Sub Display Screens” on page. 22)
⇒
⇒⇒
⇒
The
PROGRAM
lamp turns from flashing to steady
lit.
5. When the auto-stop operation finishes
⇒
⇒⇒
⇒
When the set time is up, HC200 stops regulating
temperature.
⇒
⇒⇒
⇒
The sub display flashes word
(Display shows the
remaining time)
(Display shows the
preset temperature)
Swich the
sub display
infomation