Manual

15
Changing Operation Mode
Changing to Quick Auto-Stop Mode
Use the quick auto-stop mode when you want to stop the ongoing fixed temperature
operation after the desired time.
Indication after Step/Step Procedure Explanation
1. Push the
MENU
key.
When the ongoing program number starts flashing, push
either the
▼
key or the
▲
key.
(Ex. Only Program 1 is operational)
•
Push the
MENU
key during the fixed temperature
operation.
⇒
⇒⇒
⇒
The main display flashes either the operation
program number or
(auto-stop).
Ex: In the example on the left, flashes on the
main display.
•
If the display flashes an operational program number,
push either the
▼
key or the
▲
key to show
.
⇒
⇒⇒
⇒
The
PROGRAM
lamp starts flashing.
⇒
⇒⇒
⇒
Since the fixed temperature operation is going on,
the
HEAT
lamp keeps flashing, that indicates that
HC200 is under temperature regulation.
2. Push the
ENTER
key.
•
Push the ENTER key.
⇒
⇒⇒
⇒
The main display flashes
⇒
⇒⇒
⇒
The sub display flashes
3. Ex., stopping operation in 2 hours 30 minutes.
Push either the
▼
key or the
▲
key.
•
Push either the
▼
key or the
▲
key and set your
desired time before operation stop.