Manual

11
Changing Preset Temperature during Operation
Indication after Step/Step Procedure Explanation
1. (Ex., changing a preset temperature of 37
°
C
to 50
°
C during the fixed temperature
operation.)
Push either the
▼
key or the
▲
key.
•
Push either the
▼
key or the
▲
key.
⇒
⇒⇒
⇒
The controller turns to the temperature setting mode,
and the sub display starts flashing the preset
temperature.
2. Push either the
▼
key or the
▲
key.
•
Push either the
▼
key or the
▲
key until the flashing
value on the sub display reaches your desired
temperature.
3. Push the
ENTER
key.
•
When the value on the sub display has reached your
desired temperature, push the
ENTER
key.
⇒
⇒⇒
⇒
The temperature on the sub display turns from
flashing to steady lit, and HC200 starts the fixed
temperature operation toward the newly preset
temperature.
All these steps are for the fixed temperature operation.
4.
Shutting down
Turn OFF the power switch provided on the
front of HC200.
•
Turn
OFF
the power switch provided on the front of
HC200.
⇒
⇒⇒
⇒
All the circuits are closed and indication lamps go
out.