Owner's manual

3. Caution in use

1. Be sure to turn off the breaker on connection.

2. Use either the time-up and the alarm output under the contact capacity.

3. Be careful not to short-circuit the temperature output terminal.

4. Be sure to connect the temperature output terminal to the recorder etc., with input

impedance of 100k

or more.

5. Fasten securely the screw attached to terminal for connection.

Table 1

Output of Each Machine Type

Type (series) Output

（

mV/

℃

）

DFS

DHS

DES

DTS

IL700

FP 2

SM 10