User Manual

10
3. Names and functions of parts
Operation panel
MEASURED TEMP.
℃
HEATE
R
ALARM
AUTO STOP
AUTO START
ENTER
SET
TEMP.
OVER TEMP.
PROTECTOR
FIXED TEMP.
RUN
STOP
SUB
MENU
TIMER
FIXED
TEMP.
PROGRAM
PROGRAM
No. Name Operation/action
①
RUN/STOP key Used for starting/stopping operation
②
▲▼ keys
Used for selecting settings.
③
ENTER key Used for determining a selected setting.
④
FIXED TEMP. key Key for selecting fixed temperature operation.
⑤
TIMER key Key for selecting timer operation.
Quick auto stop operation, auto stop operation or auto start
operation can be selected.
⑥
PROGRAM key Used for selecting programming and starting the program operation.
Programs of six patterns in three types can be set.
⑦
SUB MENU key Key for setting temperature of the overheat prevention device,
calibration offset temperature, the key lock function or the program
repeat function.
⑧
HEATER lamp Illuminates while heater power is on.
⑨
ALARM lamp When an error occurs, the lamp illuminates with an audible buzzer.
⑩
AUTO STOP lamp Flashes while the quick auto stop timer is being set and illuminates
while the unit is in operation.
Flashes while the auto stop timer is being set and illuminates while
the unit is in operation.
⑪
AUTO START lamp Flashes while the auto start timer is being set and illuminates while
the unit is in operation.
⑫
FIXED TEMP. lamp Flashes while fixed temperature operation is being set and
illuminates while the unit is in operation.
⑬
PROGRAM lamp Flashes while the program operation is being set and illuminates
while the unit is in operation.
⑭
MEASURED TEMP.
display
Displays measured temperature in the bath・set characters・alarm
information.
⑮
SET TEMP. display Displays a set temperature, timer settings and timer remaining time.
⑯
OVER TEMP.
PROTECTOR display
Displays the set temperature for the overheat prevention device.
①
⑦
⑯
⑮
⑭
⑧
⑨
⑩
⑪
⑫
③
②
④
⑥⑤
⑬