Manual

33
Operation Method
Input Program; Add Step
1
Step addition procedure
① Display the setting of un-used step on the setting item selection screen and then press the
ENTER key.
TROUBLE
ENTER
CANCEL
DOOR
Set TEMP
0℃
S23(un-used)
 The "SO1" (the first step) indicates "un-used" at the first registration of program.
 The items other than "Insert step", "Delete step" and "End program" can be set.
 The "un-used" steps are not displayed if no steps are left.
② Change the setting value and press the ENTER key.
③ The indication "un-used" on the lower column of Sub Display goes out.
TROUBLE
ENTER
CANCEL
DOO
R
Set TEMP 0℃
S23
④ Set the other items respectively.
⑤ Press the PROGRAM key to display the next selection screen after step addition is completed.