Instruction Manual

10
Description and Function of Each Part
Control Panel
No. Name Function
RUN/STOP Key
Starts/stops the operation.
▲▼ Key
Uses for rising UP/lowering DOWN the setting value.
SUB MENU Key
Uses for setting the overheating prevention temperature, calibration
offset temperature, or key lock function.
ENTER Key
Settles the inputted value.
FIXED TEMP Key
Chooses the fixed temperature operation.
TIMER Key
Chooses the timer operation (Quick Auto Stop/Auto Stop/Auto Start).
HEATER Lamp
Lights while the heater works.
ALARM Lamp
Lights up when an error occurs. (Buzzer sounds simultaneously.)
AUTO STOP Lamp
Blinks while setting quick auto stop timer or auto stop timer.
Lights while quick auto stop timer or auto stop timer is running.
AUTO START Lamp
Blinks while setting auto start timer.
Lights while auto start timer is running.
FIXED TEMP Lamp
Blinks while setting fixed temperature operation.
Lights while fixed temperature operation is running.
Measurement Temperature
Display
Displays the measured temperature, setting character, alarm
information.
Setting Temperature
Display
Displays the setting temperature, setting value for timer mode,
remaining time.
Overheating Prevention
Temperature Display
Displays the setting temperature for overheating prevention device.