Manual
INSTRUMENT AND CONTROL FUNCTIONS
3-8
3
cedure, only the settings made be-
fore the “SELECT” button was last
pushed will be applied.
● In this mode, the multi-function dis-
play shows the current setting for
each function (except the shift tim-
ing indicator light activity function).
To adjust the display brightness
1. Turn the key to “OFF”.
2. Push and hold the “SELECT” but-
ton.
3. Turn the key to “ON”, and then, af-
ter five seconds, release the “SE-
LECT” button.
4. Push the “RESET” button to select
the desired display brightness lev-
el.
5. Push the “SELECT” button to con-
firm the selected display bright-
ness level. The control mode
changes to the shift timing indica-
tor light activity function.
To set the shift timing indicator light ac-
tivity function
1. Push the “RESET” button to select
one of the following indicator light
activity settings:
● The indicator light will stay on
when activated. (This setting
is selected when the indicator
light stays on.)
● The indicator light will flash
when activated. (This setting
is selected when the indicator
light flashes four times per
second.)
● The indicator light is deacti-
vated; in other words, it will
not come on or flash. (This
setting is selected when the
indicator light flashes once
every two seconds.)
2. Push the “SELECT” button to con-
firm the selected indicator light ac-
tivity. The control mode changes to
the shift timing indicator light acti-
vation function.
To set the shift timing indicator light ac-
tivation function
NOTE:
The shift timing indicator light activation
function can be set between 10000
r/min and 16000 r/min. From 10000
r/min to 12000 r/min, the indicator light
can be set in increments of 500 r/min.
From 12000 r/min to 16000 r/min, the
indicator light can be set in increments
of 200 r/min.
1. Push the “RESET” button to select
the desired engine speed for acti-
vating the indicator light.
2. Push the “SELECT” button to con-
firm the selected engine speed.
The control mode changes to the
shift timing indicator light deactiva-
tion function.
To set the shift timing indicator light de-
activation function
NOTE:
● The indicator light deactivation
function can be set between
10000 r/min and 16000 r/min.
From 10000 r/min to 12000 r/min,
U5SL12E0.book Page 8 Monday, August 9, 2004 10:51 AM