Specifications
54
55
OUTBOARD MAINTENANCE & ACCESSORIES
Outboard Maintenance
& Accessories
4-STROKE PART NUMBER
OM cover F2.5A YMM-09100-00-00
OM cover F4A YMM-09101-00-00
OM cover F6A/F8C/F9.9 YMM-09102-00-00
OM cover F15C/F20B/F20C YMM-09103-00-00
OM cover F25B/V/ YMM-09104-00-00
OM cover F30/F40 YMM-09105-00-00
OM cover F50/F60 YMM-09106-00-00
OM cover F80A/F100A YMM-09107-00-00
OM cover F115A YMM-09108-00-00
OM cover F150 YMM-09109-00-00
OM cover F200A/F225A YMM-09110-00-00
OM cover F250 YMM-09111-00-00
OM cover F300/F350 YMM-09112-00-00
OUTBOARD MOTOR COVERS
OUTBOARD MOTOR COVERS
A Yamaha Outboard is a quality investment, so it makes sense to give it
the protection it deserves. There’s no better way of doing this than with
an Outboard Motor Cover.
They’re specically designed for every engine we produce from 2.5hp
upwards. The t is snug and stylish, and they’re manufactured from a
highly durable, waterproof fabric that is resistant to rot, mildew and UV
light. The special soft inner lining protects the paintwork and will keep
your engine looking at its best. Every cover has a strong eyelet for tying
it down to the engine, and most models have a stretch-cord tting with
a snap-buckle to keep the cover tight and secure in windy conditions or
when towing the boat on a trailer.
All covers come with smart Yamaha logo and graphics and there are
special styles to go with high-performance HPDI and VMAX models.
DESCRIPTION PART NUMBER
0 - 6 metres YMM-09BF0-00-01
6 - 10 metres YMM-09BF0-00-02
DESCRIPTION PART NUMBER
0 - 6 metres YMM-09FS0-00-01
6 - 10 metres YMM-09FS0-00-02
fENDER SOCKS
fENDERS
ENGINE fLUSH KIT
This extremely useful piece of equipment connects in seconds to your garden hose
and allows you to ush out harmful salt and sand. It can also be used for out-of-
water operation for tune-ups.
For 6/8/F9.9/25-250hp engines
ABB-MOTOR-FL-SH
For 3/4/5/9.9/15 engines and jet drives
ABB-FLUSH-JD-00
PROPELLER wRENCH
Designed to t F115 and all V4/V6 outboard prop nuts. Has a 9/16" square opening
on the reverse side to open garboard drain plugs.
MAR-PROPW-RN-CH
TRANSOM PLATES
Yamaha recommend these transom plates on each boat with engine from 60hp
and up.
V4/V6 engines aluminium 10mm
YMM-09TP0-00-01
V8 engines aluminium 10mm
YMM-09TP0-00-02
TRANSOM BRACKETS
The tough plastic bracket is easy to install by just threading the Rigging Hose
onto it. It requires no clamp, yet provides positive engagement. Use with the Rigging
Grommet on the other end for quick, easy rigging. When the chromium plated
copper “Through transom bracket” is used, the rigging hose is tted with the clamp.
CHROME TRANSOM BRACKET +
2 anodised stainless steel clamps ABA-THRUT-RA-SM
Plastic Transom bracket MAR-THRUT-RS-M2