Specifications

40
41
Remote Controls
Remote ContRols
1
3
2
4
REMOTE CONTROLS
DRIVE BY WIRE REMOTE CONTROL 6X6 TOPMOUNT FOR F250, F300 AND F350
Exclusive binnacle remote control unit, which requires no mechanical remote
control cables. The throttle and shift operations are electrically controlled by
Digital Network System, which will obtain smoother remote control operation
without cable friction. Rigging has been simplied, because the mechanical
cable adjustment is not required. These remote control units cover single,
twin and triple engine application.
Requires Digital Network Gauge (6Y8) for monitoring the engine.
DRIVE BY wIRE
REF. NO. PART NUMBER VARIATION CODE
ENGINE
SINGLE
STATION
DUAL STATION MOUNT
REMARKS
Single Twin Triple Main helm 2nd helm R L
1 6X6-48205-00 A • • STD (no extension to dual-station)
6X6-48205-10 C • • •
6X6-48205-20 G • •
2 6X6-48207-00 B • • STD (no extension to dual-station)
6X6-48207-10 D • • •
6X6-48207-20 H • •
3 6X6-48208-20 F • • •
6X6-48208-30 K • •
4 6X7-48206-00 A • • With emergency shut-off cord
PREMIUM 705 fLUSH SIDE MOUNT CONTROL
Slim tting unit with exceptional controllability.
• High-degree throttle angle for ner control • Thumb-operated trim/tilt switch • Neutral switch
• Push-button neutral warm-up • Corrosion-resistant casing
6x3-48206-01-00 For all engines Push to Open.
PREMIUM 704 TOP MOUNT
A thoroughbred unit with contemporary styling and advanced functionality.
• Thumb-operated trim/tilt switch and neutral lock (on most boxes) • Button release for fast idling
• Corrosion-resistant upper body with fully enclosed lower casings • Yamaha wiring harness for easy
installation and improved water sealing
704-48205-P1-00 SINGLE For all engines Push to Open.
PREMIUM 704 TwIN CONTROL
All the quality and usability of the 704 Top Mount but for twin engines.
• Cutting-edge design • Exceptionally smooth operation • Individual switches for ne tuning each engine
• Thumb-operated trim/tilt switch on both engines
704-48207-P1-00 For all engines Push to Open.
PREMIUM TRIPLE REMOTE CONTROL
A unique Yamaha control, specially designed for triple installations of our F225, F250, Z250 (HPDI) and
Z300 (HPDI) engines. Must be matched with Yamaha Triple Panel Switch and Digital Network Gauge/LAN
system (6Y8).
Note: For the Triple Remote Control, the Yamaha PowerMatched (YPM) or equivalent control cable, is
recommended. For further information, please consult your Yamaha Authorised Dealer.
6x5-48207-00-00 For all engines Push to Open.