User Manual

21
Assembly
2. Rotate the bass joint so that the tenor
joint comes into contact with the stopper
on the bass joint.
Bass Joint
Insert halfway
Double Joint
Stopper
3. Continue to insert the bass joint, all the
way into the socket.
Fully insert
Attaching the Bell
• As shown in the illustration below, gently
hold the bell key pad down to raise the
connection at the opposite end, and
insert the bell section into the bass joint.
* Take care not to apply too much pressure
on the bell key pad.
Attaching the Hand Rest
1.
Screw the hand rest into its holder stop-
ping at a comfortable position.
* Take care not to over tighten the hand
rest.
2. Tighten the ring on the screw to secure
the hand rest.
2440630_Bassoon_om_Body.indd 21 2016/01/06 17:25